JoLo
Lens board.
Especially
designed to couple the 7 inch Aero lens
with the Pacemaker Speed Graphic lens standard
On the
left, the7 inch Aero lens mounted on JoLo Mark III lens board
.
No need
for any retainer rings or spacers.
Perfect
fitting for the 7 inch Aero lens thread.
LENS BOARD
The factory made new type lens board is made out of one piece of aluminum like the original Graflex boards, including the machined drilled hole with the exact diameter and the special thread fitting to the Aero lens. The lens board is easy to handle when mounted in your camera lens holder because it will fit perfectly in the lens standard of the Pacemaker Speed Graflex and is guaranteed light proof. The aluminum of this new lens-board is a bit thicker than the original Graflex lens board thus strong enough to hold the huge weight of the big Aero lens. JoLo mark III Lens board
Note: This lens board does not fit to the earlier pre-war or Speed Graphic Anniversary Camera, If you have any doubts please
send me some photos of your camera and wait for my judgment to be absolute sure the lens-board will fit to your camera.
Pacemaker Speed Graphic equipped with Kodak Aero Lens in the JoLo Mark III lens-board.
Note: Unlike the Anniversary black lens standard, the Chrome plus Aluminum lens standard is the one which is suitable to be equiped with the 7 inch Aero lens.
NEW ADAPTOR
EQUIP YOUR SPEED GRAPHIC WITH CLASSIC LENSES.
The JoLo lens board allows another sophisticated use like mounting several old barrel lenses to your Speed Graphic camera.
JoLo Mark III plus step down rings and Zeis Tessar ƒ4,5/210.
JoLo Mark III lens board equipped with 15 inch (380 cm) Tele-Optar .
For those who want to use the JoLo mark III lens-board for other lenses as well as the Aero Lens, the JoLo adaptor is very useful*. The adaptor fits into the JoLo Mark III lens board (the same one as can be used for the Aero Lens). The JoLo Lens Board has a inner Whitworth thread. The JoLo adaptor has an outer Whitworth thread and an inner metric thread on the front side. A lot of classic lenses can be used now together with the JoLo lens board. The photo shows the Speed Graphic powered with a beautiful 4.5 / 210 mm Zeiss Tessar. The photo below shows the JoLo Lens Board, the JoLo Adaptor with the 7 Step Down rings.
The next photo shows a 15 inch Graflex Tele Optar mounted to the JoLo lens Board
These step down can be purchased on the WWW and are available in the sizes:
77-72 72-67 67-62 62-58 58-55 55-52 52-49
All your lenses equipped with metric threads and having a diameter of 77- 72- 67-62- 58- 55- 52 and 49 mm
can be used now with your Speed Graphic.
*) unfortunately no more available.